20170621_121512

All ‘Fig’ured Out

Audio #4: Onomatopoeia!

Rating: ☆☆

Who doesn’t love a good  joke combined with an onomatopeia? I know I do! And if you do too then you’ll absolutely love doing this assignment! This project involves finding a joke, riddle, etc. and pairing that joke with sounds to fill the background. The hardest part was finding the perfect joke. I spend an hour or so trying to find the best one! Unfortunately, when I would find a really good one there weren’t any sounds that went well with it, so the search continued. I ‘fig’ured it out in the end by finally finding one that I liked! I hope that you all can enjoy it just as much as I do!

I hope you all enjoyed my joke! If you didn’t, maybe if you listen to my reasoning behind picking it you’ll enjoy it a little more. My top three reasons I selected this particular joke are as follows… First, I have never heard that joke before, so I thought it would be refreshing compared to more commonly known ones. Second, compared to other jokes that I liked it flowed  better with the sounds that I chose to form my onomatopoeias. And my last reasoning is that I found it genuinely funny and wanted to share it with you all!

I selected this assignment for a couple reasons. First off, I love onomatopoeias! I think they form a good relationship between the storyteller and the listener because it allows them to ‘coimagine’ the story together. This website provides excellent examples of onomatopoeias! The second reason I chose this assignment was because not a lot of people have done this assignment, according to the assignment bank. If you want to do an easier assignment I would recommend this one! The instructions are located below. Good luck!

Procedure

Part 1: Audacity

Step 1: Open Audacity and select the microphone. When you do this a drop down menu should appear, select the ‘start monitoring’ option.

Step 2: Once you select this the microphone will turn on. To start recording press the record button and begin recording your joke.

Step 3: Once you record your joke set it aside and import your other audio files that you downloaded from FreeSound. These audio files included the following: knocking, crowd laugh, doorbell, and playful music. To import these files go to the File tab, scroll down to import, and select the audio subcatergory.

Step 4: Once you insert all of your files you will need to do some editing. Let’s start with the voice recording you did. We are going to split the voice recording into two files. Highlight the section of the audio you want to make into another slide. Once you select he portion of audio click the scissor icon.

Step 5: Now paste the audio you just cut into a new slide. It should look like the screenshot below.

Step 6: Next is organization. We want to organize the audio files so that they don’t overlap each other. Except for the background sounds. Select the ‘Time Shift’ tool to move the audios into place.

Step 7: When you organize all of your audio files work on the background music. For the background music you don’t want it to be louder than your own voice. To decrease the sound of the music go to the far lefthand side of the screen (circled below in pink). The next thing you’ll want to do is make sure the music fades out, so that it doesn’t end abruptly. Highlight the portion of the audio you want to apply the effect to, go to the Effects tab,  and scroll down to Fade Out.

Step 8: You’re almost there! To save your work go to the file tab and select the ‘export audio’ option

 

Part 2: SoundCloud

Step 9: Go to SoundCloud, sign in, and select the upload option. Select the ‘choose a file to upload’ option. Once you select your file your screen should look like the second screenshot below. Hit save!

Link to assignment is tagged above in ‘Audio #4: Onomatopoeia!′

20170621_121512

Blast From The Past

Audio #3: Music Mash

Rating: ☆☆☆☆

Has anyone ever asked you, “if you could be born in any other decade what would it be?” When I get asked this question I always say the 80’s. I love the clothes they wore at the time, the movies they made, and the music that was written (for examples of each click the links). For this particular reason I decided that for this assignment I would do an 80’s mashup. This assignment involves taking songs that are similar and creating a conversation with them. See if you can discover what the conversation is about in my mashup below!

For copyright purposes I wasn’t able to post the following mashup to SoundCloud.

If you couldn’t crack the code on what the song was about, then it’s time for me to spill the beans. The songs I used in order of appearance were: Never Gonna Give You Up by Rick Astely, Every Rose Has It’s Thorn by Poison, Time After Time by Cyndi Lauper, I Ran (So Far Away) by A Flock of Seagulls, Tainted Love by Soft Cell, and Love Is A Battlefield by Pat Benatar. The conversation I made with these songs is between a boy and a girl. These two individuals were dating, but as time went by the girl wanted to break it off.

To break the audio down further, the conversation commences with the boy telling the girl that he’s Never Gonna Give You (her) Up, which she replies to with Every Rose Has It’s (his) Thorn. I incorporated this song because I wanted to send the message that the girl finds a lot of flaws in their relationship, but the guy replies with Time After Time. The clip I used from that song is supposed to display the guy’s commitment to the girl. However, she is not convinced so she replies with I Ran (So Far Away). After failed attempts into trying to convince his partner, the guy’s mood changes with Tainted Love. I wanted to end the conversation with a powerful song, so I chose Love Is A Battlefield. This last song is said by the girl to the guy letting him know that relationships come and go, but in the end it’ll be alright.

In order to do this assignment all you need is Audacity. If you do not have the program you can download it here. In the section below you will discover how I created my mash up by following the step-by-step procedure. Good Luck!

Procedure

Step 1: Open Audacity and go to the file tab. Select the import option and click the audio subcatergory. Upload your first song. In this instance it would be Never Gonna Give You Up by Rick Astely.

Step 2: Next, highlight the beginning of the song that you want and select the trim audio tool (where the mouse is located on the screenshot)

Step 3: Repeat step 1. The next song that should be uploaded is Every Rose Has It’s Thorn by Poison.

Step 4: Once your second song is uploaded repeat step 2.

Step 5: After you’ve selected the section of the song you want you are going to move the audio of the second song, so that it plays directly after the first. This can be done by selecting the time shift tool (shown in the second screenshot)

Step 6: Keep repeating steps 3-5 for each song. The list order for the songs should be as follows:

  1. Never Gonna Give You Up
  2. Every Rose Has It’s Thorn
  3. Time After Time
  4. I Ran (So Far Away)
  5. Tainted Love
  6. Love Is A Battlefield

Step 7: For Love is a Battlefield (or for your last song) you want to make sure that it ends smoothly, if you didn’t pick the ending of the song to be your final audio clip. What you want to do is highlight the last snippet of the audio (shown in screenshot below), go to the effects tab, scroll down and click on fade out.

Step 8: Go to the file tab and select the export audio option.

Step 9: When saving your new song double check that you save it as an MP3 file. If you do not have the option to save as an MP3 go to this website and download the plug-in for Audacity.

Link to assignment is tagged above in ‘Audio #3 :Music Mash′

20170621_121512

Hearing Double

Audio #2: Combining Covers

Rating: ☆☆☆☆

Stand By Me is a classic song by Ben E. King. But what happens when you mix the original with it’s cover? Well that’s what I had to discover for this assignment. I took Ben E. King’s classic and combined it with Florence + the Machine’s cover version. I chose to do this combination because I wanted to pick a song that was relatively well known. Furthermore, I think it’s rare to find a cover version of a song that is just as good as the original.

For copyright purposes I wasn’t able to post the following song rendition to SoundCloud.

I decided to do this specific assignment because I was curious to see how these two songs would flow together. In the beginning they sounded relatively good, until they became out of sync (around 0:19). I think this rendition had an indie soulful vibe to it. I think the emotion for this combination slightly intensifies. The reasoning being, that the song itself delivers a powerful message, but the way they are both sung gives it the additional ‘oomph’. Creating this rendition only involved using the program Audacity. The procedure is listed below if you would like to recreate this assignment.

Procedure

Step 1: Open Audacity and go to the file tab. Select the import option and click the audio subcatergory. Upload both the original song and its cover in step 1

Step 2: The first audio file should be Stand By Me by Ben King and the second one should be the version by Florence + the Machines. Select the Florence version and highlight the audio frequency, then select the trim audio tool. This will get rid of the end of the song, the fade (seen in the second screenshot below).

Step 3: Move the Florence audio over by using the move tool next to the Record button. Move the audio to where the first big peak of Ben’s song is, so that the beginning of both songs sync up.

Step 4: Go to the file tab and select the export audio option.

Step 5: When saving your new song double check that you save it as an MP3 file. If you do not have the option to save as an MP3 go to this website and download the plug-in for Audacity.

Link to assignment is tagged above in ‘Audio #2: Combining Covers′

 

20170621_121512

Puppy Power

Audio #1: Sound Effects Story

Rating: ☆☆☆ ½

How many of us have walked into a pet store and are saddened by the lack of dogs there? My audio story is based on an owner who goes to pick up her puppy from the pet store groomer. However, when she walks into the pet store she doesn’t immediately pick up her dog. She walks in, browses the fish, and the dog toys until it’s time to pick up her puppy.

The reason I picked this topic for my project is because my family is thinking about getting their first dog and I thought it would be an interesting approach. However, I couldn’t get all the sounds I wanted. Most of the audio files came from the FreeSound website. The five sounds I used were, the entrance bell, high heels, fish tank noise, squeaky dog toys, and the dog barks.

If you wanted to do this assignment and need assistance, the instructions are posted below.

Part 1: FreeSound

Step 1: Go to this website and download the following sounds. I posted the screenshots to each of the sounds I used in my audio except for the dogs. In order to get the dogs type in the search bar, “dogs barking” and it will be your first result.

Part 2: Audacity

Step 2: Go to File, Import, and select the Audio subcatergory. Import your first audio file. You will be uploading your files SEPARATELY

Step 3: Once you open your first file, select the trim tool. I’ve circled it in red in the screenshot below. After you select this tool highlight the section of the audio that you DO want to use.

Step 4: Repeat steps 2 and 3 by importing your second audio file and trimming the audio.

Step 5: Now that you have a previous audio file (file 1) you don’t want to overlap the sound. Select the Time Shift tool (circled in red on the screenshot below) and slide/move your audio to where it doesn’t interfer with the first audio file

Step 6: Repeat steps 2-5 for the remaining audio files, so for this specific example  it would be for the last three.

Step 7: Once you’ve trimmed your audio and you’ve aligned them it is now time to save your work. Go to File and select Export Audio.

Step 8: When you complete step 7 you should have the option of exporting your audio file as an MP3 file. If you do not, you need to download the plug-in, Lame. Once you download the plug-in, you will see the option to download as an MP3 file. Click the save button!

Part 3: SoundCloud

Step 9: Go to your SoundCloud and log in. Select the upload button on the upper right hand side of the webpage

Step 10: Select the ‘Choose a file…’ option and upload your audacity file.

Step 11: Copy the link to link given and embed it in your blog!

Link to assignment is tagged above in ‘Audio #1 :Sound Effects Story′